Fix some more typos

Signed-off-by: marcin mikołajczak <git@mkljczk.pl>

4 files changed, 6 insertions, 6 deletions

diff --git a/docs/installation/gentoo_en.md b/docs/installation/gentoo_en.md
index 87128d6f6..dc47d27f8 100644
--- a/docs/installation/gentoo_en.md
+++ b/docs/installation/gentoo_en.md
@@ -59,7 +59,7 @@ Gentoo quite pointedly does not come with a cron daemon installed, and as such i
 
 If you would not like to install the optional packages, remove them from this line.
 
-If you're running this from a low-powered virtual machine, it should work though it will take some time. There were no issues on a VPS with a single core and 1GB of RAM; if you are using an even more limited device and run into issues, you can try creating a swapfile or use a more powerful machine running Gentoo to [cross build](https://wiki.gentoo.org/wiki/Cross_build_environment). If you have a wait ahead of you, now would be a good time to take a break, strech a bit, refresh your beverage of choice and/or get a snack, and reply to Arch users' posts with "I use Gentoo btw" as we do.
+If you're running this from a low-powered virtual machine, it should work though it will take some time. There were no issues on a VPS with a single core and 1GB of RAM; if you are using an even more limited device and run into issues, you can try creating a swapfile or use a more powerful machine running Gentoo to [cross build](https://wiki.gentoo.org/wiki/Cross_build_environment). If you have a wait ahead of you, now would be a good time to take a break, stretch a bit, refresh your beverage of choice and/or get a snack, and reply to Arch users' posts with "I use Gentoo btw" as we do.
 
 ### Install PostgreSQL
 
@@ -104,7 +104,7 @@ Not only does this make it much easier to deploy changes you make, as you can co
 
 * Add a new system user for the Pleroma service and set up default directories:
 
-Remove `,wheel` if you do not want this user to be able to use `sudo`, however note that being able to `sudo` as the `pleroma` user will make finishing the insallation and common maintenence tasks somewhat easier:
+Remove `,wheel` if you do not want this user to be able to use `sudo`, however note that being able to `sudo` as the `pleroma` user will make finishing the installation and common maintenance tasks somewhat easier:
 
 ```shell
  # useradd -m -G users,wheel -s /bin/bash pleroma
diff --git a/docs/installation/gentoo_otp_en.md b/docs/installation/gentoo_otp_en.md
index 4fafc0c17..20d8835da 100644
--- a/docs/installation/gentoo_otp_en.md
+++ b/docs/installation/gentoo_otp_en.md
@@ -49,7 +49,7 @@ Gentoo quite pointedly does not come with a cron daemon installed, and as such i
 
 If you would not like to install the optional packages, remove them from this line.
 
-If you're running this from a low-powered virtual machine, it should work though it will take some time. There were no issues on a VPS with a single core and 1GB of RAM; if you are using an even more limited device and run into issues, you can try creating a swapfile or use a more powerful machine running Gentoo to [cross build](https://wiki.gentoo.org/wiki/Cross_build_environment). If you have a wait ahead of you, now would be a good time to take a break, strech a bit, refresh your beverage of choice and/or get a snack, and reply to Arch users' posts with "I use Gentoo btw" as we do.
+If you're running this from a low-powered virtual machine, it should work though it will take some time. There were no issues on a VPS with a single core and 1GB of RAM; if you are using an even more limited device and run into issues, you can try creating a swapfile or use a more powerful machine running Gentoo to [cross build](https://wiki.gentoo.org/wiki/Cross_build_environment). If you have a wait ahead of you, now would be a good time to take a break, stretch a bit, refresh your beverage of choice and/or get a snack, and reply to Arch users' posts with "I use Gentoo btw" as we do.
 
 ### Setup PostgreSQL
 
diff --git a/docs/installation/openbsd_en.md b/docs/installation/openbsd_en.md
index 9e7e040f5..e58e144d2 100644
--- a/docs/installation/openbsd_en.md
+++ b/docs/installation/openbsd_en.md
@@ -62,7 +62,7 @@ rcctl start postgresql
 To check that it started properly and didn't fail right after starting, you can run `ps aux | grep postgres`, there should be multiple lines of output.
 
 #### httpd
-httpd will have three fuctions:
+httpd will have three functions:
 
   * redirect requests trying to reach the instance over http to the https URL
   * serve a robots.txt file
@@ -225,7 +225,7 @@ pass in quick on $if inet6 proto icmp6 to ($if) icmp6-type { echoreq unreach par
 pass in quick on $if proto tcp to ($if) port { http https } # relayd/httpd
 pass in quick on $if proto tcp from $authorized_ssh_clients to ($if) port ssh
 ```
-Replace *<network interface\>* by your server's network interface name (which you can get with ifconfig). Consider replacing the content of the authorized\_ssh\_clients macro by, for exemple, your home IP address, to avoid SSH connection attempts from bots.
+Replace *<network interface\>* by your server's network interface name (which you can get with ifconfig). Consider replacing the content of the authorized\_ssh\_clients macro by, for example, your home IP address, to avoid SSH connection attempts from bots.
 
 Check pf's configuration by running `pfctl -nf /etc/pf.conf`, load it with `pfctl -f /etc/pf.conf` and enable pf at boot with `rcctl enable pf`.
 
diff --git a/docs/installation/otp_en.md b/docs/installation/otp_en.md
index a69b2fe7a..86efa27f8 100644
--- a/docs/installation/otp_en.md
+++ b/docs/installation/otp_en.md
@@ -238,7 +238,7 @@ At this point if you open your (sub)domain in a browser you should see a 502 err
     systemctl enable pleroma
     ```
 
-If everything worked, you should see Pleroma-FE when visiting your domain. If that didn't happen, try reviewing the installation steps, starting Pleroma in the foreground and seeing if there are any errrors.
+If everything worked, you should see Pleroma-FE when visiting your domain. If that didn't happen, try reviewing the installation steps, starting Pleroma in the foreground and seeing if there are any errors.
 
 Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC, you can also [file an issue on our Gitlab](https://git.pleroma.social/pleroma/pleroma-support/issues/new).